Agilent Technologies N1911A Programming Guide

3CALCulate Subsystem
196 N1911A/1912A P-Series Power Meters Programming Guide
Example
Query
CALCulate[1]|2|3|4:RELative[:MAGNitude]:AUTO?
The query always returns OFF.
Error Message
•If CALCulate:RELative[:MAGNitude]:AUTO is set to ONCE while
SENSe:SPEed is set to 200, error –221, “Settings Conflict” occurs.
•If the value is set to ON error –224, “Illegal parameter value” occurs.
CALC1:REL:AUTO ONCE This command sets a reference value to be
used in the relative measurement on the
upper window/upper measurement.

Agilent Technologies N1911A Specifications

General

Brand	Agilent Technologies
Model	N1911A
Category	Measuring Instruments
Language	English