3CALCulate Subsystem
198 N1911A/1912A P-Series Power Meters Programming Guide
The query returns a 1 or 0 into the output buffer.
• 1 is returned when relative mode is enabled
• 0 is returned when relative mode is disabled
Query Example
Error Message
If CALCulate:RELative:STATe is set to ON while SENSe:SPEed is set to
200, error –221, “Settings Conflict” occurs.
CALC1:REL:STAT? This command queries whether relative
mode is off or on for the upper
window/upper measurement.
To Next Page
Loading...
