DISPlay Subsystem 5
N1911A/1912A P-Series Power Meters Programming Guide 229
Syntax
Parameters
Example
Item Description/Default Range of Values
numeric_value A numeric value for the analog meter upper
scale limit:
• DEF: the default is 20 dBm
• MIN: –150 dBm
• MAX: 230 dBm
Units used are determined by the current
setting of UNIT:POWer and
CALCulate:RELative:STATe as shown
in Ta bl e 5 - 16 .
–150 to 230 dBm
DEF
MIN
MAX
DISP:WIND2:ANAL:UPP 50 This command sets the lower window’s
analog meter upper scale limit to 50 dBm.
:ANAL
Space
?
numeric_value
DEF
MIN
MAX
MIN
MAX
Space
:UPP
:WIND
1
2
DISP
To Next Page
Loading...
