Agilent Technologies N1911A Programming Guide

PSTatistic Subsystem 9
N1911A/1912A P-Series Power Meters Programming Guide 335
Error Messages
• If no power sensor is connected, error –241 "Hardware missing" occurs.
• If sensor/s connected are not P- Series sensors, error –241 "Hardware
missing" occurs.
• If measurement speed setting is FAST, error –221 "Settings conflict"
occurs.
• If the acquisition mode is in continuous triggering or triggering source
is set to either INT1, INTl2, or EXT, error –221 "Settings conflict"
occurs.

Agilent Technologies N1911A Specifications

General

Brand	Agilent Technologies
Model	N1911A
Category	Measuring Instruments
Language	English