PSTatistic Subsystem 9
N1911A/1912A P-Series Power Meters Programming Guide 337
Query
PSTatistic[1]|2:CCDF:DATa:MAX?
The query returns the X- axis CCDF trace maximum value.
Query Example
Error Messages
• If the parameter set is less than 5.0, error –222 "Data out of range;
value clipped to lower limit" occurs.
• If the parameter set is more than 50.0, error –222 "Data out of range;
value clipped to upper limit" occurs.
PST1:CCDF:DAT:MAX? This command queries the maximum
value of X- axis CCDF trace for Channel A.
To Next Page
Loading...
