Agilent Technologies N1911A Programming Guide

SENSe Subsystem 10
N1911A/1912A P-Series Power Meters Programming Guide 377
Query Example
Error Messages
• If the command is used when a sensor other than a P- Series or E9320
power sensor is connected, error –241, “Hardware missing” occurs
• If the command is used when an E9320 sensor is connected and set to
AVERage mode rather than NORMal mode, the error –221, “Settings
Conflict” occurs.
SENS2:AVER2? This command queries whether averaging
is on or off for Channel B.

Agilent Technologies N1911A Specifications

General

Brand	Agilent Technologies
Model	N1911A
Category	Measuring Instruments
Language	English