Agilent Technologies N1911A Programming Guide

10 SENSe Subsystem
390 N1911A/1912A P-Series Power Meters Programming Guide
Query Example
Error Messages
The SENSe[1]]|SENSe2:CORRection:CFACtor|GAIN1 command can be
used for the 8480 Series power sensor when no sensor calibration table
has been set up. If a sensor calibration table is selected the error –221,
“Settings Conflict” occurs.
CORR:GAIN1? This command queries the current
calibration factor setting for Channel A.

Agilent Technologies N1911A Specifications

General

Brand	Agilent Technologies
Model	N1911A
Category	Measuring Instruments
Language	English