SENSe Subsystem 10
N1911A/1912A P-Series Power Meters Programming Guide 427
Query
[SENSe[1]]|SENSe2:MRAT?
The query returns the current speed setting, either NORMal, DOUBle or
FAST.
Query Example
Error Messages
•If <character_data> is not set to NORMal, DOUBle or FAST, error
–224 “Illegal parameter value” occurs.
• If a P- Series or an E- Series power sensor is not connected and
<character_data> is set to FAST, error –241 “Hardware missing”
occurs.
MRAT? This command queries the current speed
setting for Channel A.
To Next Page
Loading...
