Agilent Technologies N1911A Programming Guide

SENSe Subsystem 10
N1911A/1912A P-Series Power Meters Programming Guide 429
• 1 is returned when the upper range is selected
• 0 is returned when the lower range is selected
Query Example
Error Messages
This command is used with the E- Series power sensor. If one is not
connected the error –241, “Hardware missing” occurs.
POW:AC:RANG? This command queries the current setting
of the power sensor range.
NOTE
For E-Series power sensor (E9320), the auto ranging feature will be disabled when normal
and trigger modes are selected.

Agilent Technologies N1911A Specifications

General

Brand	Agilent Technologies
Model	N1911A
Category	Measuring Instruments
Language	English