Agilent Technologies N1911A Programming Guide

10 SENSe Subsystem
446 N1911A/1912A P-Series Power Meters Programming Guide
Reset Condition
On reset, the delay is set to 0 seconds.
Query
SENSe[1]]|SENSe2:TRACe:OFFSet:TIME?
The query returns the current delay between the delayed trigger point and
the start of the trace.
Query Example
Error Messages
• If the command is used when a sensor other than a P- Series or E9320
power sensor is connected, error –241, “Hardware missing” occurs
• If the command is used when an E9320 sensor is connected and set to
AVERage mode rather than NORMal mode, the error –221, “Settings
Conflict” occurs.
SENS:TRAC:OFFS:TIME? This command queries the current delay
between the delayed trigger point and the
start of the trace for Channel A.

Agilent Technologies N1911A Specifications

General

Brand	Agilent Technologies
Model	N1911A
Category	Measuring Instruments
Language	English