STATus Subsystem 11
N1911A/1912A P-Series Power Meters Programming Guide 471
Syntax
Parameters
Query
:NTRansition?
The query returns a 15 bit decimal- weighted number representing the
contents of the Negative Transition Register of the SCPI register set being
queried. The format of the return is <NR1> in the range of 0 to 32767
(2
15
–1).
:PTRansition <NRf>|<non-decimal numeric>
This command is used to set the Positive Transition Register of the SCPI
Register Set you require to control. The first 15 bits of the input
parameter are written into the Positive Transition Register of the SCPI
Register Set concerned. The last bit (bit 15) is always set to 0.
Type Description Range of Values
NRf The value used to set the NTR
Register.
0 to 2
16
–1
non-decimal numeric
NRf
non-decimal numeric
?
:NTR
space
To Next Page
Loading...
Need help?
General
