Agilent Technologies N1911A

609
N1911A/1912A P-Series Power Meters
Programming Guide
Agilent Technologies
13
TRACe Subsystem
TRACe Subsystem 610
TRACe[1]|2[:DATA]? <character_data> 612
TRACe[1]|2:DEFine:DURation:REFerence<numeric_value> 614
TRACe[1]|2:DEFine:TRANsition:REFerence <numeric_value>,
<numeric_value> 616
TRACe[1]|2:MEASurement:INSTant:REFerence? <numeric_value> 618
TRACe[1]|2:MEASurement:PULSe[1]|...|10:DCYCle? 620
TRACe[1]|2:MEASurement:PULSe[1]|...|10:DURation? 622
TRACe[1]|2:MEASurement:PULSe[1]|...|10:PERiod? 624
TRACe[1]|2:MEASurement:PULSe[1]|...|10:SEParation? 626
TRACe[1]|2:MEASurement:TRANsition[1]|...|10:NEGative:DURation? 6
28
TRACe[1]|2:MEASurement:TRANsition[1]|...|10:NEGative:OCCurrence?
630
TRACe[1]|2:MEASurement:TRANsition[1]|...|10:POSitive:DURation? 63
2
TRACe[1]|2:MEASurement:TRANsition[1]|...|10:POSitive:OCCurrence?
634
TRACe[1]|2:MEASurement:REFerence? <numeric_value> 636
TRACe[1]|2:STATe <boolean> 638
TRACe[1]|2:UNIT <character_data> 640
This chapter explains how to use the TRACe command subsystem to
configure and read back the measured power trace.