Agilent Technologies N1911A Programming Guide

14 TRIGger Subsystem
668 N1911A/1912A P-Series Power Meters Programming Guide
Example
Reset Condition
On reset the trigger holdoff is set to 1 µs.
Query
TRIGger[:SEQuence]:HOLDoff?
The query returns the current trigger holdoff setting.
Query Example
TRIG:SEQ1:HOLD 0.1 This command sets the trigger holdoff to
100 ms for Channel A.
TRIG:SEQ:HOLD? This command queries the trigger holdoff
setting for Channel A.

Agilent Technologies N1911A Specifications

General

Brand	Agilent Technologies
Model	N1911A
Category	Measuring Instruments
Language	English