Agilent Technologies N1911A Programming Guide

SERVice Subsystem 15
N1911A/1912A P-Series Power Meters Programming Guide 719
Query Example
Error Messages
• If no power sensor is connected, error –241 “Hardware missing” occurs.
• If a a sensor other than an E9320 power sensor is connected, error
–241 “Hardware missing” occurs.
•If INIT:CONT is not set to OFF, error –221, “Settings conflict” occurs.
SERV:SENS:PCAL? This command returns the peak path
calibration factor block for Channel A.

Agilent Technologies N1911A Specifications

General

Brand	Agilent Technologies
Model	N1911A
Category	Measuring Instruments
Language	English