Diagnostics Configureoptionsfor theevent and system logs
IX20 User Guide
1094
modem Modem
netmon Active recovery
network Network interfaces
openvpn OpenVPN
portal Captive portal
remote Remote control
restart Restart
serial Serial
sms SMS commands
speed Speed
stat Network statistics
user User
wireless WiFi
wol Wake-On-LAN
(config)> system log event
b. Depending on the event category, you can enable or disable informational events, status
events, and error events. Some categories also allow you to set the statusinterval, which is
the time interval between periodic statusevents. For example, to configure DHCPserver
logging:
i. Use the question mark (?) to determine what eventsare available for DHCPserver
logging configuration:
(config)> system log event dhcpserver ?
...
DHCP server: Settings for DHCP server events. Informational events
are generated
when a lease is obtained or released. Status events report the
current list of
leases.
Parameters Current Value
-----------------------------------------------------------------
--------------
info true Enable informational
events
status true Enable status events
status_interval 30m Status interval
(config)> system log event dhcpserver
ii. To disable informational messages for the DHCPserver:
(config)> system log event dhcpserver info false
(config)>
To Next Page
Loading...
Need help?
General