Digi IX20

Hotspot
IX20 User Guide
390
n
To disable:
(config network hotspot new_hotspot)> enable false
(config network hotspot new_hotspot)>
n
To enable, it it has been disabled:
(config network hotspot new_hotspot)> enable true
(config network hotspot new_hotspot)>
6. Add devicesto the bridge:
a. Determine available devices:
(config network bridge new_hotspot_bridge)> .. .. interface lan device
?
Device: The network device used by this network interface.
Format:
/network/device/eth1
/network/device/eth2
/network/device/loopback
/network/bridge/hotspot_bridge
/network/bridge/lan
/network/wireless/ap/digi_ap
/network/wireless/ap/digi_hotspot_ap
Default value: /network/bridge/lan
Current value: /network/bridge/lan
(config network bridge new_hotspot_bridge)>
b. Add the appropriate device. For example, to add the Digi AP Wi-Fi accesspoint:
(config network bridge new_hotspot_bridge)> add device end
/network/wireless/ap/digi_ap
(config)>
7. Set an accesspoint, and Ethernet port, or a bridge for the hotspot'sdevice:
a. Determine available devices:
(config network hotspot new_hotspot)> device ?
Device: Device to use for this hotspot interface.
Format:
/network/device/eth1
/network/device/eth2
/network/device/loopback
/network/bridge/hotspot_bridge
/network/bridge/lan
/network/bridge/new_hotspot_bridge
/network/wifi/ap/digi_ap