Revision Date Description
l
Each time a device connects to Digi Remote
Manager after the device boots (or re-boots), the
device now immediately uploads all health metrics.
n
VPN:
l
Added new Enable open routingconfiguration
setting (VPN > IP tunnels) to enable packets
destined for an addresswhich is not explicitly in
the routing table to exit the IPtunnel.
n
Networking:
l
Added new TCP retries2 configuration setting
(Network >Advanced) to control the number of
times an unacknowledged TCPdata packet will be
retransmitted before the connection is considered
lost.
R October 2023
Release of Digi IX20 firmware version 23.9:
n
Register a device to DRM:
l
Added a link to the Dashboard of the local web UI
to register and add the device to Digi Remote
Manager.
n
Updated Dashboard:
l
Updated the layout of the Dashboard page of the
web UI to combine the network interface and
cellular modem details into a single Network
Activity panel.
n
Hotspot improvement:
l
Improved support for integration with
HotspotSystems, including:
o
PSD2 SessGarden
o
Login/Logout URL
o
Configurable remote webserver FQDN
n
Primary Responder:
l
Added Primary Responder mode setting to lock
down the device to comply with AT&TFirstNet and
Verizon Response.
n
Domain allow list:
l
Added a Domain allow list feature to control what
domainsare accessible through the Digi device.
n
Fallback:
l
Added a fallback server setting to control which
DNSserver is used asthe fallback in the event that
IX20 User Guide
6
To Next Page
Loading...
Need help?
General