MPC5553/MPC5554 Microcontroller Reference Manual, Rev. 5
16-16 Freescale Semiconductor
Table 16-14. Changes to MPC5553/5554 for Rev. 5 Release
Description of Change
• In the table “MMU Configuration for Internal Flash Boot”, for the TLB entry 2- EBI region, updated the Physical Base
Address to 0x2000_0000.
• In section “CAN and eSCI Configuration”, updated the watchdog timer time-out period from 3 x 2^28 system clock cycles
to 2^27 system clock cycles.
• In the tbale “Serial Boot Mode—Baud Rate and Watchdog Summary”, updated the Watchdog Timeout period (seconds)
entries.
To Next Page
Loading...