H3C MSR Series

469
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
domain-name: Specifies a PKI domain by its name, a case-insensitive string of 1 to 31 characters.
The domain name cannot contain the special characters listed in Table 63.
Table 63 Special characters
Character name
Symbol
Character name
Symbol
Tilde ~ Dot .
Asterisk * Left angle bracket <
Backslash \ Right angle bracket >
Vertical bar | Quotation marks "
Colon : Apostrophe '
Usage guidelines
If you do not specify a PKI domain, this command displays the certificate request status for all PKI
domains.
Examples
# Display certificate request status for PKI domain aaa.
<Sysname> display pki certificate request-status domain aaa
Certificate Request Transaction 1
Domain name: aaa
Status: Pending
Key usage: General
Remain polling attempts: 10
Next polling attempt after : 1191 seconds
# Display certificate request statuses for all PKI domains.
<Sysname> display pki certificate request-status
Certificate Request Transaction 1
Domain name: domain1
Status: Pending
Key usage: General
Remain polling attempts: 10
Next polling attempt after : 1191 seconds
Certificate Request Transaction 2
Domain name: domain2
Status: Pending
Key usage: Signature
Remain polling attempts: 10
Next polling attempt after : 188 seconds