H3C MSR Series

931
Syntax
Centralized devices in standalone mode:
display connection-limit stat-nodes { global | interface interface-type interface-number }
[ destination destination-ip | service-port port-number | source source-ip ] * [ count ]
display connection-limit stat-nodes { global | interface interface-type interface-number }
dslite-peer b4-address [ count ]
Distributed devices in standalone mode/centralized devices in IRF mode:
display connection-limit stat-nodes { global | interface interface-type interface-number } [ slot
slot-number ] [ destination destination-ip | service-port port-number | source source-ip ] * [ count ]
display connection-limit stat-nodes { global | interface interface-type interface-number } [ slot
slot-number ] dslite-peer b4-address [ count ]
Distributed devices in IRF mode:
display connection-limit stat-nodes { global | interface interface-type interface-number }
[ chassis chassis-number slot slot-number ] [ destination destination-ip | service-port port-number
| source source-ip ] * [ count ]
display connection-limit stat-nodes { global | interface interface-type interface-number }
[ chassis chassis-number slot slot-number ] dslite-peer b4-address [ count ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
global: Displays statistics about IPv4 connections that match connection limit rules globally.
interface interface-type interface-number: Specifies an interface by its type and number.
slot slot-number: Specifies a card by its slot number. This option is available only when you specify
the global keyword or specify a virtual interface, such as a VLAN interface or tunnel interface.
(Distributed devices in standalone mode.)
slot slot-number: Specifies an IRF member device by its member ID. This option is available only
when you specify the global keyword or specify a virtual interface, such as a VLAN-interface and
tunnel interface. (Centralized devices in IRF mode.)
chassis chassis-number slot slot-number: Specifies a card on an IRF member device. The
chassis-number argument represents the member ID of the IRF member device. The slot-number
argument represents the slot number of the card. This option is available only when you specify the
global keyword or specify a virtual interface, such as a VLAN interface or tunnel interface.
(Distributed devices in IRF mode.)
destination destination-ip: Specifies a destination by its IP address.
service-port port-number: Specifies a service port by its port number.
source source-ip: Specifies a source by its IP address.
dslite-peer b4-address: Specifies a B4 device on a DS-Lite tunnel. The b4-address argument
specifies the IPv6 address of the B4 device. The following matrix shows the dslite-peer b4-address
option and hardware compatibility: