Lenze i550

4.3 Operang interfaces
Depending on the inverter, there are one or several opons for accessing the device parame-
ters that are available for customising the drive task.
Simple access to the device parameters is provided by the Lenze Engineering
Tool »EASY Starter«. Connecon X16 is used as an interface for an engineering PC in this case.
Other operang interfaces include the keypad or the Smart Keypad App.
If the inverter is equipped with the "PROFINET" network opon, the connectors X2x6 or X2x7
can also be ulised.
Commissioning
Operang interfaces
24