Lenze i550

8.1.1 Standard setpoint source
The selected "setpoint source" serves to provide the inverter with its setpoint. The setpoint
source can be selected individually for each operang mode.
Possible setpoint sources:
•
Analog inputs
•
Keypad
•
Network
•
Parameterisable setpoints (presets)
•
Digital inputs (congured as HTL input for pulse train or HTL encoder)
•
"Motor potenometer" funcon
•
"Sequencer" funcon
Details
•
For applicaons only requiring one setpoint, it is sucient to dene the standard setpoint
source in 0x2860:003 (P201.03).
•
For applicaons requiring a change-over of the setpoint source during operaon, the func-
ons for setpoint change-over have to be congured accordingly. 4Changing the setpoint
source during
operaon ^ 1304Congure setpoint sources ^ 158
Conguring the torque control
Basic seng
Standard setpoint source
151