EasyManua.ls Logo

Lenze i550

Lenze i550
704 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
12.1.2 Predened control and status words
For establishing a simple network connecon, the inverter provides predened control and
status words for the device prole CiA 402, the AC drive prole as well as in the LECOM for-
mat.
Details
Process data are exchanged via cyclic data exchange between the network master and the
inverter.
For the cyclic data exchange, the inverter is provided with 24 network registers.
12 network registers are provided as input registers for data words from the network mas-
ter to the inverter.
12 network registers are provided as output registers for data words from the inverter to
the network master.
Each network register is provided with a corresponding code that denes which parame-
ters (or other data codes) are mapped to the network register.
The input and output registers are divided into three blocks (A, B, C) in each case, featuring
4 successive data words, respecvely:
Network register
Input register Output register
Network IN A0
Network IN A1
Network IN A2
Network IN A3
Network OUT A0
Network OUT A1
Network OUT A2
Network OUT A3
Network IN B0
Network IN B1
Network IN B2
Network IN B3
Network OUT B0
Network OUT B1
Network OUT B2
Network OUT B3
Network IN C0
Network IN C1
Network IN C2
Network IN C3
Network OUT C0
Network OUT C1
Network OUT C2
Network OUT C3
The terms "input" and "output" refer to the point of view of the inverter:
Input data are transmied by the network master and received by the inverter.
Output data are transmied by the inverter and received by the network master.
The assignment of the network registers and the number of data words that can
be transmied cyclically varies according to the network/communicaon proto-
col. You can nd detailed informaon in the documentaon for the respecve
communicaon protocol.
Data mapping cannot be applied to all parameters. The mappable parameters
are marked correspondingly in the "Parameter aribute list". 4Parameter
aribute list ^ 660
Conguring the network
Control the inverter via network
Predened control and status words
282

Table of Contents

Other manuals for Lenze i550

Related product manuals