Lenze i550

Address Name / seng range / [default seng] Info
0x2D81:005
(P151.05)
Life-diagnosis: Relay switching cycles
(Life-diagnosis: Relay cycles)
•
Read only
Display of the number of switching cycles of the relay.
0x2D81:006
(P151.06)
Life-diagnosis: Short-circuit counter
(Life-diagnosis: Short-circ.count)
•
Read only
Display of the number of short circuits that have occurred.
0x2D81:007
(P151.07)
Life-diagnosis: Earth fault counter
(Life-diagnosis: Earthfault count)
•
Read only
Display of the number of earth faults that have occurred.
0x2D81:008
(P151.08)
Life-diagnosis: Clamp acve
(Life-diagnosis: Clamp acve)
•
Read only
Display of the number of "Imax: Clamp responded too oen" errors that
have occurred.
•
"Clamp" = short-me inhibit of the inverter in V/f operaon when the
current limit shown in 0x2DDF:002 is reached.
0x2D81:009
(P151.09)
Life-diagnosis: Fan operang me
(Life-diagnosis: Fan oper. me)
•
Read only: x s
Display showing for how long the internal fan has been running so far.
17.4.5 Device idencaon
The following parameters show some general informaon about the inverter.
Parameter
Address Name / seng range / [default seng] Info
0x2000:001
(P190.01)
Device data: Product code
(Device data: Product code)
•
Read only
Product code of the complete device.
Example: "I55AE155D10V10017S"
•
If control unit and power unit were ordered separately, the product
code "XXXXXXXXXXXXXXXXXXX" is displayed.
0x2000:002
(P190.02)
Device data: Serial number
(Device data: Serial number)
•
Read only
Serial number of the complete device.
Example: "0000000000000000XYZXYZ"
•
If control unit and power unit were ordered separately, the serial
number "XXXXXXXXXXXXXXXXXXX" is displayed.
0x2000:004
(P190.04)
Device data: CU rmware version
(Device data: CU rmware ver.)
•
Read only
Firmware version of the control unit.
Example: "01.00.01.00"
0x2000:005
(P190.05)
Device data: CU rmware type
(Device data: CU rmware type)
•
Read only
Firmware type of the control unit.
Example: "IOFW51AC10"
0x2000:006
(P190.06)
Device data: CU bootloader version
(Device data: CU bootlder ver.)
•
Read only
Bootloader version of the control unit.
Example: "2015.10-20180517"
0x2000:007
(P190.07)
Device data: CU bootloader type
(Device data: CU bootlder type)
•
Read only
Bootloader type of the control unit.
Example: "IOBL51AOnn"
0x2000:008
(P190.08)
Device data: Object directory version
(Device data: OBD version)
•
Read only
Example: "108478"
0x2000:010
(P190.10)
Device data: PU rmware version
(Device data: PU rmware ver.)
•
Read only
Firmware version of the power unit.
Example: "00202"
0x2000:011
(P190.11)
Device data: PU rmware type
(Device data: PU rmware type)
•
Read only
Firmware type of the power unit.
Example: "IDFW5AA"
0x2000:012
(P190.12)
Device data: PU bootloader version
(Device data: PU bootlder ver.)
•
Read only
Bootloader version of the power unit.
0x2000:013
(P190.13)
Device data: PU bootloader type
(Device data: PU bootlder type)
•
Read only
Bootloader type of the power unit.
0x2000:014
(P190.14)
Device data: Module - rmware version
(Device data: Mod. rmware)
•
Read only
Firmware version of the plugged-in module (e. g. WLAN module).
Diagnoscs and fault eliminaon
Diagnosc parameters
Service life diagnoscs
608