Lenze i550

12.10.7.3 Device idencaon
For device idencaon in the network, the inverter provides the EtherCAT objects listed in
the following.
The objects can only be accessed via the EtherCAT network.
Parameter
Address Name / seng range / [default seng] Info
0x1000 Device type
•
Read only
•
From version 02.00
CANopen device prole according CANopen specicaon CiA 301/
CiA 402.
0x1008 Manufacturer device name
•
Read only
•
From version 02.00
Display of the manufacturer device name.
0x1009 Manufacturer hardware version
•
Read only
•
From version 02.00
Display of the manufacturer hardware version.
0x100A Manufacturer soware version
•
Read only
•
From version 02.00
Display of the manufacturer soware version.
0x1018:001 Identy object: Vendor ID
•
Read only
•
From version 02.00
Display of the manufacturer's idencaon number.
0x1018:002 Identy object: Product ID
•
Read only
•
From version 02.00
Display of the product code of the inverter.
0x1018:003 Identy object: Revision number
•
Read only
•
From version 02.00
Display of the main and subversion of the rmware.
0x1018:004 Identy object: Serial number
•
Read only
•
From version 02.00
Display of the serial number of the inverter.
Conguring the network
EtherCAT
Diagnoscs
391