Lenze i550 - 12.10.3.3 Further Communication Objects

Address Name / seng range / [default seng] Info
0x1A05:001 TPDO6 mapping parameter: Applicaon object 1
•
Read only
•
From version 02.00
Mapping entry for the selecon of an object to be sent.
0x1A05:002 TPDO6 mapping parameter: Applicaon object 2
•
Read only
•
From version 02.00
0x1A05:003 TPDO6 mapping parameter: Applicaon object 3
•
Read only
•
From version 02.00
0x1A05:004 TPDO6 mapping parameter: Applicaon object 4
•
Read only
•
From version 02.00
0x1A05:005 TPDO6 mapping parameter: Applicaon object 5
•
Read only
•
From version 02.00
0x1A05:006 TPDO6 mapping parameter: Applicaon object 6
•
Read only
•
From version 02.00
0x1A05:007 TPDO6 mapping parameter: Applicaon object 7
•
Read only
•
From version 02.00
0x1A05:008 TPDO6 mapping parameter: Applicaon object 8
•
Read only
•
From version 02.00
0x1A05:009 TPDO6 mapping parameter: Applicaon object 9
•
Read only
•
From version 02.00
0x1A05:010 TPDO6 mapping parameter: Applicaon object 10
•
Read only
•
From version 02.00
0x1A05:011 TPDO6 mapping parameter: Applicaon object 11
•
Read only
•
From version 02.00
0x1A05:012 TPDO6 mapping parameter: Applicaon object 12
•
Read only
•
From version 02.00
0x1A05:013 TPDO6 mapping parameter: Applicaon object 13
•
Read only
•
From version 02.00
0x1A05:014 TPDO6 mapping parameter: Applicaon object 14
•
Read only
•
From version 02.00
0x1A05:015 TPDO6 mapping parameter: Applicaon object 15
•
Read only
•
From version 02.00
0x1A05:016 TPDO6 mapping parameter: Applicaon object 16
•
Read only
•
From version 02.00
12.10.3.3 Further communicaon objects
The parameters for the implemented EtherCAT objects are described below.
Conguring the network
EtherCAT
Process data transfer
384