Lenze i550

12.10.8 EoE communicaon
The "Ethernet over EtherCAT (EoE)" is used to send standard Ethernet telegrams via the Ether-
CAT network without aecng the real-me communicaon of the EtherCAT process data.
This extension facilitates the set-up of parameter communicaon (SDO communicaon) with
the inverters on the EtherCAT bus by means of a standard Ethernet connecon (e.g. from a PC
with »EASY Starter«).
System architecture
Beckho controller Lenze / other controllers ESD - Slave bridge
Supported protocols and services
•
ARP
•
DHCP
•
ICMP (ping)
•
UDP/TCP
•
GCI-SDO communicaon
Conguring the network
EtherCAT
EoE communicaon
392