Lenze i550

Display of EoE-specic informaon
The following table can be used to read EoE-specic informaon for diagnosc purposes.
Parameter
Address Name / seng range / [default seng] Info
0x2362:001
(P511.01)
Acve EtherCAT sengs: EoE IP address
(EtherCAT diag.: EoE IP address)
•
Read only
0x2362:002
(P511.02)
Acve EtherCAT sengs: EoE subnet mask
(EtherCAT diag.: EoE subnet mask)
•
Read only
•
From version 05.01
0x2362:003
(P511.03)
Acve EtherCAT sengs: EoE gateway
(EtherCAT diag.: EoE gateway)
•
Read only
0x2362:004
(P511.04)
Acve EtherCAT sengs: Device idener
(EtherCAT diag.: Device ident.)
•
Read only
•
From version 02.00
Display of the clear device address in the network which is dened via
rotary encoder switch or object 0x2361:004 (P510.04).
0x2362:005
(P511.05)
Acve EtherCAT sengs: EoE virtual MAC address
(EtherCAT diag.: EoE virt MAC add)
•
Read only
•
From version 02.00
0x2362:006
(P511.06)
Acve EtherCAT sengs: Staon address
(EtherCAT diag.: Staon address)
•
Read only
•
From version 02.00
Display of the acve staon address.
0x2362:007
(P511.07)
Acve EtherCAT sengs: Tx length
(EtherCAT diag.: Tx length)
•
Read only
•
From version 02.00
Display of the length of the transmied cyclic data in bytes.
0x2362:008
(P511.08)
Acve EtherCAT sengs: Rx length
(EtherCAT diag.: Rx length)
•
Read only
•
From version 02.00
Display of the length of the received cyclic data in bytes.
Conguring the network
EtherCAT
EoE communicaon
393