Lenze i550

4.4.2 Structure of the parameter descripons
•
The parameter descripons in this documentaon are structured in table form.
•
The representaon disnguishes parameters with a seng range, text, selecon list, and
bit-coded display.
•
The default seng of parameters with a write access feature is shown in bold.
•
The display code as well as the short keypad designaon of the parameter, which is limited
to 16 characters, are shown in brackets.
Example: parameters with a seng range
Address Name / seng range / [default seng] Info
Index:Subindex
(display code)
Parameter designaon
(abbreviated keypad designaon)
Minimum value ... [default seng] ... maximum value
•
Oponal informaon with regard to the parameter.
Explanaons and notes with regard to the parameter.
Example: parameters with a selecon list
Address Name / seng range / [default seng] Info
Index:Subindex
(display code)
Parameter designaon
(abbreviated keypad designaon)
•
Oponal informaon with regard to the parameter.
Explanaons and notes with regard to the parameter.
Note: The corresponding selecon number (here 0, 1, or 2) must be set.
Other values are not permissible.
0 Designaon of selecon 0 Oponally: explanaons and notes with regard to the corresponding
selecon.
The default selecon is shown in bold.
1 Designaon of selecon 1
2 Designaon of selecon 2
Example: parameters with a bit-coded display
Address Name / seng range / [default seng] Info
Index:Subindex
(display code)
Parameter designaon
(abbreviated keypad designaon)
•
Oponal informaon with regard to the parameter.
Explanaons and notes with regard to the parameter.
Bit 0 Designaon of bit 0 Oponally: explanaons and notes with regard to the corresponding bit.
Bit 1 Designaon of bit 1
Bit 2 Designaon of bit 2
... ...
Bit 15 Designaon of bit 15
4.4.3 Parameter overview lists
•
Keypad parameter list: for the parameterisaon using the keypad, contains a list of all
parameters which can also be accessed by means of the keypad. ^ 558
•
Parameter aribute list: contains a list of all inverter parameters. This list in parcular
includes some informaon that is relevant for the reading and wring of parameters via
the network. ^ 660
Commissioning
General informaon on parameter seng
Parameter overview lists
31