Lenze i550

DNS is not supported.
The host name only describes the device.
5.Click "Change".
6.Open the "Module Denion" dialog box.
7.Here the access to the I/O data for the technology applicaons "Speed" and "Torque" or a
freely denable I/O process data set is dened.
a) Select connecon "Speed", "Speed & Torque" or "Custom I/O Connecon".
"Speed" and "Torque" correspond to the ODVA "AC Drive Speed/Torque" prole.
"Custom I/O Connecon" provides a freely denable I/O process data set.
b) Set data type to the corresponding value (SINT, INT, DINT).
The real data length of each object that is mapped in the I/O data is determined by the
inverter OBD object.
INT and SINT prevent an uneven data length.
DINT prevent an uneven number of data words.
8.Click "Change" in the line "Input" or "Output" to adapt the corresponding mapping individu-
ally.
This example shows a mapping selecon for inputs:
Conguring the network
AC drive prole
Customised conguraons
339