Lenze i550

Address Name / seng range / [default seng] Info
0x2022:006
(P700.06)
Device commands: Save OEM data
(Device commands: Save OEM data)
1 = save current parameter sengs in the OEM memory of the memory
module with mains failure protecon.
•
At the same me, the parameter sengs are saved in the main mem-
ory of the memory module.
•
When the device command has been executed successfully, the value
0 is shown.
0 O / ready Only status feedback
1 On / start Execute device command
2 In progress Only status feedback
3 Acon cancelled
4 No access
5 No access (Inverter disabled)
Related topics
4Behaviour of the inverter in case of incompable data in the memory module ^ 516
Device funcons
Saving/loading the parameter sengs
500