Lenze i550

Impact of the write access protecon on »EASY Starter« funcons
The following »EASY Starter« funcons are not supported when write access protecon is
acve:
•
Parameter set download
•
Denion of the "Favorites" parameters.
•
Denion of the parameters for the "Parameter change-over" funcon
The following »EASY Starter« funcons are supported irrespecve of whether write access
protecon is acve:
•
Opcal device idencaon 0x2021:001 (P230.01)
•
Enable/inhibit inverter
•
Reseng parameters to default 0x2022:001 (P700.01)
•
Save parameter set 0x2022:003 (P700.03)
•
Load user parameter 0x2022:004 (P700.04)
•
Load OEM parameter 0x2022:005 (P700.05)
•
Error reset 0x2631:004 (P400.04)
Device funcons
Access protecon
Write access protecon
505