Lenze i550

14. Set the address to the WLAN IP address of the drive. The default IP address of the WLAN
module is: 192.168.178.1. The acve WLAN address is in 0x2442:001.
15. Click the Insert buon.
»EASY Starter« searches for connected devices via the communicaon path selected.
When the connecon has been established successfully, the inverter is displayed in the
device list of »EASY Starter«. The inverter parameters can now be accessed via the tabs
of »EASY Starter«.
Recommendaon: Click the buon in the toolbar of the »EASY Starter« to start visual track-
ing. This funcon serves to quickly check whether the connecon to the correct device has
been established. 4Opcal device idencaon ^ 495
Using accessories
WLAN module
WLAN access point mode
590