NEC Univerge SV9100 - Page 1017

1017
Disabled
System Availability
Terminals
All Multiline Terminals
Required Component(s)
None
Related Features
 Do Not Disturb
 Handsfree Answerback/Forced Intercom Ringing
 Hotline
 One-Touch Calling
 Programmable Function Keys
 Single Line Telephones, Analog 500/2500 Sets
 Voice Over
Guide to Feature Programming
Program
Number
Program Name/Description
Input Data
Default
15-07-01
Programmable Function Keys
Assign a function key for Reverse Voice Over
(code 47 + destination extension).
Assign a function key for Voice Over to the
destination extension (code 48). This allows the
user at the destination to switch between calls if
they were busy when the Reverse Voice Over
was initiated.
Line Key 1 ~ 48
0 ~ 99 (Normal Function Code
851 by default)
*
00 ~
*
99 (Appearance
Function Code) (Service Code
852 by default)
20-06-01
Class of Service for Extensions
Assign a Class of Service (COS) to each
extension (1 ~ 15).
Day Night/Mode: 1 ~ 8
Class of Service of Extensions
(1 ~ 15)
Extension port
101 = Class 15
All other
extension port =
Class 1
20-13-06
Class of Service Options (Supplementary
Service) – Automatic Off-Hook Signaling
(Automatic Override)
Allow a busy extension to Manually (0) or
Automatically (1) receive off-hook signals.
This setting is to receive incoming call
signaling information during call queuing.
0 = Off
1 = On
COS 1 ~ 15 = 1