NEC Univerge SV9100 - Page 1110

1110
Program
Number
Program Name/Description
Input Data
Default
13-04-05
Speed Dialing Number and Name –
Incoming Ring Pattern
Define the ring tone for the caller ID routed call.
Incoming Ring Pattern
0 = Normal Pattern
1 ~ 4 = Tone Pattern (1 ~ 4)
5 ~ 9 = Scale Pattern (1 ~ 5)
10 ~ 13 = Tone Pattern (5 ~ 8)
0
13-04-13
Speed Dialing Number and Name – Large
LED Illumination Setup by (CID)
Define the color the large LED will blink when
Incoming call with matching Caller ID is
received.
1 = Not used
2 = Red
3 = Green
4 = Blue
5 = Yellow
6 = Purple
7 = Light Blue
8 = White
9 = Rotation
0 = No Setting
No Setting
13-05-01
Speed Dialing Trunk Group – Trunk Group
Number
For each System Speed Dialing number, enter
the routing option Trunk Group Number
(1 ~ 100) to dial out on.
0 = No setting
1 ~ 100
0
14-02-06
Analog Trunk Data Setup – Pause at 1st digit
after Line Seize in Manual Dial Mode
Enable/Disable the system ability to pause after
dialing the first digit.
0 = No Pause (No)
1 = Pause (Yes
1
15-02-04
Multiline Telephone Basic Data setup –
Redial (Speed Dial) Control
Assign the extension Redial key for either
Common or Group Speed Dialing.
0 = Common and Individual
Speed Dialing
1 = Group Speed Dialing
0
15-07-01
Programmable Function Keys
Assign a function key for System Speed Dialing
(27) or Group Speed Dialing (28). You can
program the key as either a general Speed
Dialing key or you can choose to store a bin
number with the function key. This key then
always dials the associated bin number. If
storing a bin number along with the code, do
not store 0, 00 or 000. To bypass entering a bin
number, press Hold (Hold is also required if
programming the function key using the service
code 851).
Line Key 1 ~ 48
0 ~ 99 (Normal Function Code
851 by default)
*
00 ~
*
99 (Appearance
Function Code) (Service Code
852 by default)
15-14-01
Programmable One-Touch Keys – Station
Speed Dial Data
Assign the extensions Speed Dial number
(1 ~ 10).
Maximum of 24 digits.
1~0, *, #, Pause, Hookflash, @
(Code for Answer-Wait)
No Setting
15-14-02
Programmable One-Touch Keys – Station
Speed Dial Name
Assign the name associated with the extension
Speed Dial Bin (1 ~ 10).
Name
No Setting
20-06-01
Class of Service for Extensions
Assign a Class of Service (1 ~ 15) to an
extension.
Day Night/Mode: 1 ~ 8
Class of Service of Extensions
(1 ~ 15)
Extension port
101 = Class 15
All other
extension port =
Class 1