NEC Univerge SV9100 - Page 1206

1206
Program
Number
Program Name/Description
Input Data
Default
24-02-07
System Options for Transfer – Trunk-to-
Trunk Transfer Release Warning Tone
This timer starts when a trunk begins talking
with another trunk (for example: Trunk-to-Trunk
Transfer, outgoing from trunk, Tandem
Trunking).
When this time expires, a warning tone is
heard. If Program 24-02-10 is set, the
conversation disconnects after time expires.
This time is set again when the external digit
time expires. One of the trunks used must be
an analog trunk (or leased line).
0 ~ 64800 seconds
1800
24-02-10
System Options for Transfer – Disconnect
Trunk-to-Trunk
This timer starts after the Trunk-to-Trunk
warning tone is heard.
0 ~ 64800 seconds
0
24-04-01
Automatic Trunk-to-Trunk Transfer Target
Setup
Assign the Speed Dialing number (0 ~ 9999) to
be used as the destination for the
Trunk-to-Trunk Transfer.
Trunks: 1 ~ 400
0 ~ 9999
9999
25-07-07
System Timers for VRS/DISA – Long
Conversation Warning Tone Time
Determine the time a DISA caller or any
trunk-to-trunk (such as Tandem Trunking)
conversation can talk before the Long
Conversation tone is heard.
0 ~ 64800 seconds
3600
25-07-08
System Timers for VRS/DISA – Long
Conversation Disconnect Time
Determine the time the system waits before
disconnecting a DISA or any trunk-to-trunk
(such as Tandem Trunking) call after the Long
Conversation tone is heard.
0 ~ 64800 seconds
10