NEC Univerge SV9100 - Page 1222

1222
Term
Definition
Terminal
Terminal Number/Called Party Number (maximum 24 digits)
OTG
Outgoing Call Frequency/number of outgoing calls (maximum 65535 calls)
Duration
Call Duration for an Outgoing Call
Cost
Call Charge (Not Used)
ICM
Incoming Call Frequency/number of incoming calls (maximum 65535 calls)
Answer
Answer Frequency (maximum 65535 calls)
Duration
Call Duration for an Incoming Call
Ringing
Ringing Duration
Abandon
Number of Abandoned Calls (maximum 65535 calls)
Related Features
 Station Message Detail Recording
Guide to Feature Programming
Program
Number
Program Name/Description
Input Data
Default
10-20-12
LAN Setup for External Equipment – TCP
Port
Define the TCP port/address/etc. for
communicating to external equipment.
0 ~ 65535
90-20-01
Traffic Report Data Setup – Call Traffic
Output
Determine whether or not the Call Traffic
Output should be measured.
0 = Not Measured
1 = Measure
0
90-21-01
Traffic Report Output – Output Port Type
Define the output port to be used for the traffic
reports. The reports print hourly when
connected to the output device.
0 = No Setting
3 = LAN Port GCD-CP10
0
Operation
None