NEC Univerge SV9100 - Page 1299

1299
displayed, if station name is not available the extension number is displayed). Also, a
virtual extension can now display the caller ID of an internal or external caller when the
virtual is not set to ring (Previously the virtual extension must be set to ring or CID is not
displayed).
Default Settings
Extensions 201~299 are the default for CAR/VE.
System Availability
Terminals
All Multiline Terminals
Required Component(s)
None
Related Features
 Call Arrival (CAR) Keys
 Call Waiting/Camp-On
 Secondary Incoming Extension
Guide to Feature Programming
Program
Number
Program Name/Description
Input Data
Default
11-04-01
Virtual Extension Numbering
Assign Extension Number for the Virtual
Extensions (1 ~ 512).
Maximum of eight digits.
Virtual Extension
Port No. 1 ~ 99 =
Virtual Extension
Number
201 ~ 299
Virtual Extension
Port No. 100 ~
512 = No Setting
14-02-17
Analog Trunk Data Setup – Sync. Ringing
Enable or Disable ringing per trunk.
0 = Disable
1 = Enable
1
15-01-01
Basic Extension Data Setup – Extension
Name
Define the extension/virtual extension name.
Maximum of 12 characters.
STA 101 = Ext
101
STA 102 = Ext
102, etc.