NEC Univerge SV9100 - Page 1301

1301
Program
Number
Program Name/Description
Input Data
Default
15-10-01
Virtual Incoming Extension Ring Tone Order
Setup
When two or more virtual extensions are set on
a function key on the telephone, and the tone
pattern by which the sound of each extension
differs, the priority of ring sound is set up.
0 = Tone Pattern 1
1 = Tone Pattern 2
2 = Tone Pattern 3
3 = Tone Pattern 4
4 = Incoming Extension Ring
Tone
5 = Tone Pattern 5
6 = Tone Pattern 6
7 = Tone Pattern 7
8 = Tone Pattern 8
Order 1 Pattern
0 = Pattern 1
Order 2 Pattern
1 = Pattern 2
Order 3 Pattern
2 = Pattern 3
Order 4 Pattern
3 = Pattern 4
15-11-01
Virtual Extension Delayed Ring Assignment
Individually program an extension Virtual
Extension key(s) for Delayed Ringing (1) or
Immediate Ringing (0).
KY01 Mode 1:
0 = Immediate Ring
1 = Delayed Ring
0
15-18-01
Virtual Extension Key Enhanced Options –
Virtual Extension Key Operation Mode
Assign if a call to a VE Holds (1) on the VE or
Releases to the phone that answered the VE.
0 = Release
1 = Land On the Key
0
15-18-02
Virtual Extension Key Enhanced Options –
Display Mode when pacing a call on Virtual
Extension Key
Define if calls to or from a Virtual Extension Key
display the Virtual Extension Key name or the
name of the extension where it resides.
0 = Secondary Extension Name
1 = Actual Station Name
0
15-18-03
Virtual Extension Key Enhanced Options –
Show CLI
When set to a 0, the caller ID of a trunk call/
station call pointed to a virtual extension will
not be displayed if the virtual extension is not
set to ring.
When set to a 1, the caller ID of a trunk call
pointed to a virtual extension WILL be
displayed if the virtual extension is not set to
ring. Station calls to a virtual that is not
assigned to ring will display the station name or
number if Program 15-18-04 is set to a 1.
0 = No CLI info
1 = Show CLI info
0
15-18-04
Virtual Extension Key Enhanced Options –
Show Internal Caller Information
When set to a 0, internal calls to the virtual
extension will not show the name or number of
the extension that is calling.
When set to 1, internal calls to the virtual
extension WILL show the name or number of
the extension that is calling if the virtual is
assigned to ring or if Program 15-18-03 is set to
a 1.
0 = Do not show
1 = Show
0
15-18-05
Virtual Extension Key Enhanced Options –
One Ring
When set to a 0, the virtual extension follows
the normal ring cycle.
When set to a 1, the virtual extension will only
ring one time (the virtual extension must be first
set to ring in Program 15-08).
0 = Normal Ring Cycle
1 = One Ring
0