NEC Univerge SV9100 - Page 1342

1342
Guide to Feature Programming
Program
Number
Program Name/Description
Input Data
Default
11-10-20
Service Code Setup (for System
Administrator) – VRS - Record/Erase
Message
Define the service code to record or erase a
VRS message.
MLT, SLT
0 ~ 9,
*
, # Maximum of eight
digits
716
11-10-21
Service Code Setup (for System
Administrator) – VRS - General Message
Playback
Define the service code to playback the general
message.
MLT, SLT
0 ~ 9,
*
, # Maximum of eight
digits
711
11-10-22
Service Code Setup (for System
Administrator) – VRS - Record or Erase
General Message
Define the service code to record or erase a
general message on the VRS.
MLT, SLT
0 ~ 9,
*
, # Maximum of eight
digits
712
11-12-54
Service Code Setup (for Service Access) –
VRS Routing for ANI/DNIS
Define the service code to use when setting up
ANI/DNIS Routing to the VRS Automated
Attendant. Using the Transfer feature, this also
allows a call to be transferred to the VRS
(default: 782).
MLT, SLT
0 ~ 9,
*
, # Maximum of eight
digits
882
15-07-01
Programmable Function Keys
For the VRS Waiting Message feature, assign
the VRS Incoming Call Queuing Setup key
(code 52 + ring group #) to manually enable the
feature.
Line Key 1 ~ 48
0 ~ 99 (Normal Function Code
851 by default)
*
00 ~
*
99 (Appearance
Function Code) (Service Code
852 by default)
20-06-01
Class of Service for Extensions
Assign a Class of Service (1 ~ 15) to
extensions.
Day Night/Mode: 1 ~ 8
Class of Service of Extensions
(1 ~ 15)
Extension port
101 = Class 15
All other
extension port =
Class 1
20-07-13
Class of Service Options (Administrator
Level) – VRS Record (VRS Msg Operation)
Turn Off or On an extension user ability to
record, listen to, or erase VRS messages.
0 = Off
1 = On
COS 1 ~ 14 = 0
COS 15 = 1