NEC Univerge SV9100 - Page 1343

1343
Program
Number
Program Name/Description
Input Data
Default
20-07-14
Class of Service Options (Administrator
Level) – VRS General Message Play
Turn Off or On an extension user ability to dial 4
or Service Code 611 to listen to the General
Message.
0 = Off
1 = On
COS 1 ~ 14 = 0
COS 15 = 1
20-07-15
Class of Service Options (Administrator
Level) – VRS General Message Record/
Delete
Turn Off or On an extension user ability to dial
Service Code 612 and record, listen to, or erase
the General Message.
0 = Off
1 = On
COS 1 ~ 14 = 0
COS 15 = 1
20-11-15
Class of Service Options (Hold/Transfer
Service) – VRS Personal Greeting (Message
Greeting)
Turn Off or On an extension user ability to dial
Service Code 616 to record, listen to, or erase a
Personal Greeting. This option also affects Park
and Page.
0 = Off
1 = On
COS 1 ~ 15 = 1
20-13-23
Class of Service Options (Supplementary
Service) – Display the Reason for Transfer
Select whether or not an extension should
display the reason a call is being transferred to
their extension (Call Forward Busy, Call
Forward No Answer, DND).
0 = Off
1 = On
COS 1 ~ 15 = 0
20-15-11
Ring Cycle Setup – VRS Waiting Message
Incoming Call
Set the ring cycle callers hear when the VRS
Waiting Message feature is used.
Ringing Cycle = 1 ~ 13
6
21-01-02
System Options for Outgoing Calls –
Intercom Interdigit Time
When placing Intercom calls, users must dial
each digit during this time.
0 ~ 64800 seconds
10
22-01-10
System Options for Incoming Calls – VRS
Waiting Message Operation
Define whether the VRS Waiting Message is
Automatically or Manually set.
0 = Enable Always
1 = Change by Manual
Operation
0
22-01-11
System Options for Incoming Calls – VRS
Waiting Message Interval Time
For VRS Waiting Message, determine the time
between VRS messages.
0 ~ 64800 seconds
20