NEC Univerge SV9100 - Page 1344

1344
Program
Number
Program Name/Description
Input Data
Default
22-02-01
Incoming Call Trunk Setup
For each Night Service mode, enter 1 if trunk
should be automatically answered by VRS
Automated Attendant.
Trunks 1 ~ 400
0 = Normal
1 = VRS (second dial tone if no
VRS installed)
2 = DISA
3 = DID
4 = DIL
5 = E&M Tie line
6 = Delayed VRS
7 = ANI/DNIS
8 = DID(DDI) Mode Switching
0
22-04-01
Incoming Extension Ring Group
Assignment
Assign extensions (up to 48) to Ring Groups.
Calls ring extensions according to Ring Group
programming.
Maximum of eight digits.
Extensions
101 ~ 108 (first
eight ports) ring
for incoming
Ring Group 1
calls. No other
extensions ring
for incoming
Ring Group 1
calls.
22-14-01
VRS Delayed Message for IRG – 1st Delayed
Message Start Time
For each Ring Group, set the time the system
waits before playing the first message. This
time is also used for VRS Waiting Message.
0 ~ 64800 seconds
0
22-14-02
VRS Delayed Message for IRG – 1st Delayed
Message Number
For each Ring Group, select the message
number to be played as the first message
(0 ~ 101). This program is also used for VRS
Waiting Message.
0 ~ 101
0 = No Message
101 = Fixed Message
0
22-14-03
VRS Delayed Message for IRG – 1st Delayed
Message Sending Count
For each Ring Group, set the number of times
the first message is played. This program is
also used for VRS Waiting Message.
0 ~ 255 (times)
0
22-14-04
VRS Delayed Message for IRG – 2nd
Delayed Message Number
For each Ring Group, select the message
number to be played as the second message
(0 ~ 101). This program is also used for VRS
Waiting Message.
0 ~ 101
0 = No Message
101 = Fixed Message
0
22-14-05
VRS Delayed Message for IRG – 2nd
Delayed Message Sending Count
For each Ring Group, set the number of times
the second message is played. This program is
also used for VRS Waiting Message.
0 ~ 255 (times)
0