NEC Univerge SV9100 - Page 1345

1345
Program
Number
Program Name/Description
Input Data
Default
22-14-06
VRS Delayed Message for IRG – Tone Kind
at Message Interval
For each Ring Group, determine what the caller
hears between messages. This program is also
used for VRS Waiting Message.
0 = Ring Back Tone
1 = MOH Tone
2 = BGM Source
0
22-14-07
VRS Delayed Message for IRG – Disconnect
Time After the end of VRS Delayed Message
For each Ring Group, set the time the system
waits after playing the VRS message before
disconnecting the call. To prevent the call from
disconnecting, set this option to 0. This
program is also used for VRS Waiting
Message.
0 = No Disconnect
1 ~ 64800 seconds
60
22-15-01
VRS Delayed Message for Department
Group – 1st Delayed Message Start Time
For each Department Group, set the time the
system waits before playing the first message.
This program is also used for VRS Waiting
Message.
0 ~ 64800 seconds
0
22-15-02
VRS Delayed Message for Department
Group – 1st Delayed Message Number
For each Department Group, select the
message number to be played as the first
message (0 ~ 101). This program is also used
for VRS Waiting Message.
0 ~ 101
0 = No Message
101 = Fixed Message
0
22-15-03
VRS Delayed Message for Department
Group – 1st Delayed Message Sending
Count
For each Department Group, set the number of
times the first message is played. This program
is also used for VRS Waiting Message.
0 ~ 255 (times)
0
22-15-04
VRS Delayed Message for Department
Group – 2nd Delayed Message Number
For each Department Group, select the
message number to be played as the second
message (0 ~ 101). This program is also used
for VRS Waiting Message.
0 ~ 101
0 = No Message
101 = Fixed Message
0
22-15-05
VRS Delayed Message for Department
Group – 2nd Delayed Message Sending
Count
For each Department Group, set the number of
times the second message is played. This
program is also used for VRS Waiting
Message.
0 ~ 255 (times)
0
22-15-06
VRS Delayed Message for Department
Group – Tone Kind at Message Interval
For each Department Group, determine what
the caller hears between messages. This
program is also used for VRS Waiting
Message.
0 = Ring Back Tone
1 = MOH Tone
2 = BGM Source
0