NEC Univerge SV9100 - Page 1392

1392
Program
Number
Program Name/Description
Input Data
Default
84-19-11
SIP Extension CODEC Information Basic
Setup – G729 Jitter Buffer (max)
Define G.729 Jitter Buffer maximum accepted
value.
0 ~ 300ms
80
84-19-17
SIP Extension CODEC Information Basic
Setup – Jitter Buffer Mode
Define the Jitter Buffer mode.
1 = Static
3 = Self Adjusting
3
84-19-18
SIP Extension CODEC Information Basic
Setup – VAD Threshold
Define the VAD Threshold.
0 ~ 30 dB
20
84-19-28
SIP Extension CODEC Information Basic
Setup – Audio Capability Priority
Define Audio Capability Priority.
0 = G.711_PT
2 = G.729_PT
3 = G.722
4 = G.726
5 = Not Used
0
84-19-33
SIP Extension IP CODEC Information Basic
Setup – Number of G.722 Audio Frames
Define the number of Audio Frames for G.722
CODEC.
1 ~ 4
1 = 10ms
2 = 20ms
3 = 30ms
4 = 40ms
3
84-19-35
SIP Extension IP CODEC Information Basic
Setup – G.722 Jitter Buffer (min)
Define the minimum setting for the G.722 Jitter
Buffer.
0 ~ 300ms
30
84-19-36
SIP Extension IP CODEC Information Basic
Setup – G.722 Jitter Buffer (Average)
Define the average setting for the G.722 Jitter
Buffer.
0 ~ 300ms
60
84-19-37
SIP Extension IP CODEC Information Basic
Setup – G.722 Jitter Buffer (Max)
Define the maximum setting for the G.722 Jitter
Buffer.
0 ~ 300ms
120
84-19-38
SIP Extension IP CODEC Information Basic
Setup – Number of G.726 Audio Frames
Define the number of G.726 Audio Frames.
1 ~ 4
1 = 10ms
2 = 20ms
3 = 30ms
4 = 40ms
3
84-19-39
SIP Extension IP CODEC Information Basic
Setup – G.726 Voice Activity Detection Mode
Enable/Disable the G.726 Voice Activity
Detection Mode.
0 = Disable
1 = Enable
0