NEC Univerge SV9100 - Page 142

142
Guide to Feature Programming
Program
Number
Program Name/Description
Input Data
Default
11-10-06
Service Code Setup (for System
Administrator) – Setting the Automatic
Transfer for Each Trunk Line
Set the service code for setting automatic
transfer for each trunk line.
MLT
0 ~ 9,
*
, # Maximum of eight
digits
833
11-10-07
Service Code Setup (for System
Administrator) – Canceling the Automatic
Transfer for Each Trunk Line
Set the service code for canceling automatic
transfer for each trunk line.
MLT
0 ~ 9,
*
, # Maximum of eight
digits
834
11-10-08
Service Code Setup (for System
Administrator) – Setting the Destination for
Automatic Trunk Transfer
Set the service code for setting the destination
for automatic trunk transfer.
MLT
0 ~ 9,
*
, # Maximum of eight
digits
835
11-10-18
Service Code Setup (for System
Administrator) – Off-Premise Call Forward
by Door Box
Set the service code for setting automatic
transfer for each trunk line.
MLT
0 ~ 9,
*
, # Maximum of eight
digits
822
11-11-01
Service Code Setup (for Setup/Entry
Operation) – Call Forward – All
Set the service code for setting call forwarding
all calls.
MLT, SLT
0 ~ 9,
*
, # Maximum of eight
digits
841
11-11-02
Service Code Setup (for Setup/Entry
Operation) – Call Forward – Busy
Set the service code for setting call forwarding
for busy calls.
MLT, SLT
0 ~ 9,
*
, # Maximum of eight
digits
842
11-11-03
Service Code Setup (for Setup/Entry
Operation) – Call Forward – No Answer
Set the service code for setting call forwarding
for no answer.
MLT, SLT
0 ~ 9,
*
, # Maximum of eight
digits
843
11-11-04
Service Code Setup (for Setup/Entry
Operation) – Call Forward – Busy/No
Answer
Set the service code for setting call forwarding
for busy or no answer.
MLT, SLT
0 ~ 9,
*
, # Maximum of eight
digits
844
11-11-05
Service Code Setup (for Setup/Entry
Operation) – Call Forward – Both Ring
Set the service code for setting call forwarding
for busy or no answer.
MLT, SLT
0 ~ 9,
*
, # Maximum of eight
digits
845
11-11-07
Service Code Setup (for Setup/Entry
Operation) – Call Forwarding – Follow Me
Set the service code for setting call forwarding
for follow me.
MLT, SLT
0 ~ 9,
*
, # Maximum of eight
digits
846
11-11-08
Service Code Setup (for Setup/Entry
Operation) – Do Not Disturb
Set the service code for setting call forwarding
for Do Not Disturb.
MLT, SLT
0 ~ 9,
*
, # Maximum of eight
digits
847