NEC Univerge SV9100 - Page 208

208
Program
Number
Program Name/Description
Input Data
Default
20-08-06
Class of Service Options (Outgoing Call
Service) – Toll Restriction Override
Turn Off or On Toll Restricting Override
(Service Code 663).
0 = Off
1 = On
COS 1 ~ 15 = 0
20-08-07
Class of Service Options (Outgoing Call
Service) – Repeat Redial
Turn Off or On an extension user ability to use
Repeat Redial.
0 = Off
1 = On
COS 1 ~ 15 = 1
20-08-08
Class of Service Options (Outgoing Call
Service) – Toll Restriction Dial Block
Turn Off or On an extension user ability to use
Dial Block.
0 = Off
1 = On
COS 1 ~ 15 = 0
20-08-09
Class of Service Options (Outgoing Call
Service) – Hotline/Extension Ringdown
Turn Off or On Ringdown Extension for
extensions with this COS.
0 = Off
1 = On
COS 1 ~ 15 = 0
20-08-10
Class of Service Options (Outgoing Call
Service) – Signal/Voice Call
Turn Off or On an extension allowing it to force
Handsfree Answerback or Forced Intercom
Ringing for outgoing Intercom calls.
0 = Off
1 = On
COS 1 ~ 15 = 1
20-08-11
Class of Service Options (Outgoing Call
Service) – Protect for the Call Mode
Switching from Caller
When an extension is set to ring mode for ICM
calls, enabling this option prevents callers from
changing the call to voice announce mode.
0 = Off
1 = On
COS 1 ~ 15 = 0
20-08-12
Class of Service Options (Outgoing Call
Service) – Department Group Step Calling
Turn Off or On an extension user ability to use
Department Group Step Calling.
0 = Off
1 = On
COS 1 ~ 15 = 1
20-08-13
Class of Service Options (Outgoing Call
Service) – ISDN CLIP
Determine if the ISDN calling line identity
presentation and screening indicators are to be
allowed.
0 = Off
1 = On
COS 1 ~ 15 = 0
20-08-14
Class of Service Options (Outgoing Call
Service) – Call Address Information
Enable/ Disable Call Address Information for
each Class of Service.
0 = Off
1 = On
COS 1 ~ 15 = 0