209
Class of Service Options (Outgoing Call
Service) – Block Outgoing Caller ID
Turn Off or On a user Class of Service from
automatically blocking outgoing Caller ID
information when a call is placed. If block is
enabled, the system automatically inserts the
Caller ID block code *67 (defined in Program
14-01-21) before the user dialed digits (this
requires Program 14-02-10 to be enabled). If
block is disabled, the system outdials the call
just as it was dialed by the user.
Class of Service Options (Outgoing Call
Service) – Display E911 Dialed Extension
Name and Number
Turn Off or On an extension ability to display
the name and number of the extension that
dialed 911.
Class of Service Options (Outgoing Call
Service) – ARS Override of Trunk Access
Map
Turn Off or On an extension user ability to
override the trunk access map programming for
outgoing calls.
Class of Service Options (Outgoing Call
Service) – Hotline for SPK
Turn Off or On an extension user ability to
activate hotline or ringdown when pressing the
Speaker key.
Class of Service Options (Outgoing Call
Service) – Hot Key Pad
Turn Off or On an extension user ability to make
a call by just dialing the number without first
going off-hook.
Class of Service Options (Outgoing Call
Service) – Automatic Trunk Seizing by
Pressing Speaker Key
Enable/Disable the ability to access trunks
when going off-hook by pressing the speaker
key for each Class of Service.
Class of Service Options (Outgoing Call
Service) – Voice Over to busy Virtual
Extension
Enable/Disable the ability to make voice over to
a busy virtual extension for each Class of
Service.
Class of Service Options (Outgoing Call
Service) – Display Indication for Security
Sensor Detection
Enable(1) or Disable(0) an extension’s ability to
display indication for security sensor detection.
To Next Page
Loading...
