210
Class of Service Options (Outgoing Call
Service) – Display Indication for Emergency
Call by Remote Inspection
Enable(1) or Disable(0) an extension’s ability to
display indication for emergency call by remote
inspection.
Class of Service Options (Incoming Call
Service) – Second Call for DID/DISA/DIL/
E&M Override
Turn Off or On the extension ability to receive a
second call from a DID, DISA, DIL, or tie line
caller.
With this option set to 1, the destination
extension must be busy for a second DNIS caller to
ring through. If the destination extension does not
have a line or Call Appearance (CAP) Keys
available for the second call and a previous call is
ringing the extension but has not been answered, the
second caller hears busy regardless of this program
setting.
Class of Service Options (Incoming Call
Service) – Caller ID Display
Turn Off or On the Caller ID display at an
extension.
Class of Service Options (Incoming Call
Service) – Sub Address Identification
Define whether or not an extension displays the
Caller Sub-Address.
Class of Service Options (Incoming Call
Service) – Notification for Incoming Call List
Existence
Determine whether or not the CHECK LIST
message is displayed to indicate a missed call.
Class of Service Options (Incoming Call
Service) – Signal/Voice Call
Turn Off or On an extension user ability to
enable Handsfree Answerback or Forced
Intercom Ringing for their incoming Intercom
calls.
Class of Service Options (Incoming Call
Service) – Incoming Time Display
If this option is set to 1, the Incoming Call Time
is displayed on the multiline terminals LCD
while the telephone is ringing.
Caller ID should be enabled for this feature in
Program 20-09-06 to function.
To Next Page
Loading...
