NEC Univerge SV9100 - Page 220

220
Program
Number
Program Name/Description
Input Data
Default
20-13-47
Class of Service Options (Supplementary
Service) – Station Number Display
Determine if a station Number is displayed (On)
or not displayed (Off) in the LCD when the
phone is idle.
0 = Off
1 = On
COS 1 ~ 15 = 1
20-13-48
Class of Service Options (Supplementary
Service) – Station Name Display
Determine if a station Number is displayed (On)
or not displayed (Off) in the LCD when the
phone is idle.
0 = Off
1 = On
COS 1 ~ 15 = 1
20-13-49
Class of Service Options (Supplementary
Service) – BLF Indication on CO Incoming
State
Determine if a BLF of the station lights when a
Normal CO call is ringing the phone.
0 = Off
1 = On
COS 1 ~ 15 = 0
20-13-50
Class of Service Options (Supplementary
Service) – AIC Agent display which call is
from
Determine if the station logged in via AIC codes
shows which queue the call is coming from.
0 = Off
1 = On
COS 1 ~ 15 = 1
20-13-51
Class of Service Options (Supplementary
Service) – Number and Name appear in the
directory
Determine if an extension name and number
are listed (On) or unlisted (Off) in the directory.
0 = Off
1 = On
COS 1 ~ 15 = 1
20-13-52
Class of Service Options (Supplementary
Service) – VoIP All DSP Busy Display
Enable/Disable the All DSP Busy alarm
displayed on the LCD when the caller makes an
IP call and there is no VoIP DSP resource.
0 = Off
1 = On
COS 1 ~ 15 = 1
20-13-53
Class of Service Options (Supplementary
Service) – Language Selection for Specific
Extension
This setting must be Enabled (1) for a
telephones Class of Service for this feature to
function.
0 = Off
1 = On
COS 1 ~ 15 = 0
20-13-54
Class of Service Options (Supplementary
Service) – Call Waiting for Standard SIP
Terminal
Set up Call waiting (Off-hook Signaling) for
Standard SIP terminal.
0 = Off
1 = On
COS 1 ~ 15 = 0
20-14-01
Class of Service Options for DISA/E&M –
First Digit Absorption (Delete First Digit
Dialed)
For Tie Lines, Enable/Disable the ability to
absorb (ignore) the first incoming digit. Use this
to make the tie trunk compatible with 3- and
4-digit Tie Line service. This option does not
apply to DISA.
0 = Off
1 = On
COS 1 ~ 15 = 0