NEC Univerge SV9100 - Page 221

221
Program
Number
Program Name/Description
Input Data
Default
20-14-02
Class of Service Options for DISA/E&M –
Trunk Group Routing/ARS Access
Enable/Disable a DISA or tie trunk caller ability
to dial 9 for Trunk Group Routing or Automatic
Route Selection (ARS).
0 = Off
1 = On
COS 1 ~ 15 = 1
20-14-03
Class of Service Options for DISA/E&M –
Trunk Group Access
Enable/Disable a DISA or tie trunk caller ability
to access trunk groups for outside calls (Service
Code 704).
0 = Off
1 = On
COS 1 ~ 15 = 1
20-14-04
Class of Service Options for DISA/E&M –
Outgoing System Speed Dial
Enable/Disable a DISA or tie trunk caller’s
ability to use System Speed Dialing.
0 = Off
1 = On
COS 1 ~ 15 = 0
20-14-05
Class of Service Options for DISA/E&M –
Operator Calling
Enable/Disable a DISA or tie trunk caller ability
to dial 0 for the telephone system operator.
0 = Off
1 = On
COS 1 ~ 15 = 1
20-14-06
Class of Service Options for DISA/E&M –
Internal Paging
Enable/Disable a DISA or tie trunk caller’s
ability to use the telephone system Internal
Paging.
0 = Off
1 = On
COS 1 ~ 15 = 1
20-14-07
Class of Service Options for DISA/E&M –
External Paging
Enable/Disable a DISA or tie trunk caller ability
to use the telephone system External Paging.
0 = Off
1 = On
COS 1 ~ 15 = 1
20-14-08
Class of Service Options for DISA/E&M –
Direct Trunk Access
Enable/Disable a DISA or tie trunk caller ability
to use Direct Trunk Access (Service Code 715).
0 = Off
1 = On
COS 1 ~ 15 = 0
20-14-09
Class of Service Options for DISA/E&M –
Forced Trunk Disconnect <Not for ISDN
T-point>
Enable/Disable a tie trunk caller ability to use
Forced Trunk Disconnect (Service Code *26).
This option is not available to DISA callers.
0 = Off
1 = On
COS 1 ~ 15 = 0
20-14-10
Class of Service Options for DISA/E&M –
Call Forward Setting by Remote via DISA
Enable/Disable a DISA callers ability to use the
Call Forward service codes (Program 11-11-01
through Program 11-11-05).
0 = Off
1 = On
COS 1 ~ 15 = 0
20-14-11
Class of Service Options for DISA/E&M –
DISA/Tie Trunk Barge-In
Enable/Disable a DISA or tie trunk user from
using the Barge-In feature.
0 = Off
1 = On
COS 1 ~ 15 = 0
20-14-12
Class of Service Options for DISA/E&M –
Retrieve Park Hold
Turn Off or On the ability for a DISA caller to
retrieve parked or held calls.
0 = Off
1 = On
COS 1 ~ 15 = 1